|
|
Post by afx on Nov 4, 2018 7:11:40 GMT -8
I've ordered a standard body 964 kit but haven't received it yet but here are the modified wheels on the Turbo body. I added a strip of flat stock around the rim to increase their diameter and also widened the rears to fit the racing slicks.  The Fujimi kit only provides a stock interior so it will take some work to convert it to a proper racing version. I started by cutting out the rear seat and building a bulk head from flat stock. Also sanded off the speakers on the package tray.   |
|
|
|
Post by Chris K. Hale on Nov 4, 2018 11:20:25 GMT -8
|
|
|
|
Post by afx on Nov 12, 2018 3:12:08 GMT -8
Those are some great links Chris-thanks for sharing them. The narrow body kit arrived, the roof was a bit smashed but I think it is usable.   |
|
|
|
Post by afx on Nov 18, 2018 5:47:20 GMT -8
Grafted on the rear wing from a turbo body with a smashed roof.  While not 100% correct this will allow me to build a reasonable facsimile of a C4 lightweight by modifying the turbo wing surround. The Leichtbau is very rare with only 22 examples produced.  or I could use the high wing and replicate the N-GT.  But I think I'll save the high wing for the turbo body.  |
|
|
|
Post by afx on Nov 18, 2018 5:48:30 GMT -8
|
|
|
|
Post by afx on Nov 18, 2018 5:49:03 GMT -8
|
|
|
|
Post by afx on Nov 22, 2018 17:22:44 GMT -8
Some reshaping of the rear valance and added the driver's side notch in the rear bumper for the dual exhaust.  Fabricated roll cage.  |
|
|
|
Post by garydavis on Nov 23, 2018 12:36:30 GMT -8
Very Nice cage work JC. Very CLEAN!!!
|
|
|
|
Post by afx on Nov 23, 2018 14:24:19 GMT -8
Thanks Gary. Calling the roll cage finished.  |
|
|
|
Post by afx on Nov 24, 2018 7:20:16 GMT -8
Removed the center console and made blank door cards. The gray interior is what you get in the kits.  |
|
|
|
Post by afx on Nov 24, 2018 8:48:43 GMT -8
Fabricated a simple ECU from rectangular rod.   |
|
|
|
Post by afx on Nov 24, 2018 9:22:06 GMT -8
Differential control knobs made from straight pins.   |
|
|
|
Post by garydavis on Nov 24, 2018 11:08:56 GMT -8
OH Yea...your fab work is really looking good JC...
|
|
|
|
Post by afx on Nov 25, 2018 6:04:07 GMT -8
Thanks Gary. - Added the front air ducts included in some of the racing versions of the kit and opened the holes
- Added a tow hook
- Cut in the racing window in the side glass
|
|
|
|
Post by Joel_W on Nov 26, 2018 7:44:13 GMT -8
JC,
I'm truly impressed with your skills to create a correct 964 C4. To tell the truth, I wasn't to sure exactly what a 964 C4 is other then a variant of the 911 series, so Google provided the basics for me.
Joel
|
|
