gorf
Full Time Ride
Posts: 133
|
Post by gorf on Sept 25, 2020 11:29:19 GMT -8
I dropped my Tamiya 12th scale Ferrari 312-B and it is not going back together as well as I had hoped and therefore I feel that it does not warrant the AZRM wheel set. It is one of 50 made. macsmodeling.com/mysite/AZMW%2012001.htm You may have to scroll down to see photos. Contact me OTB if you would. Steve
|
|
|
Post by Joel_W on Sept 26, 2020 6:22:49 GMT -8
Gorf, Sorry to read that the build had a accidental drop that's not fully repairable.
Joel
|
|
gorf
Full Time Ride
Posts: 133
|
Post by gorf on Sept 28, 2020 5:29:55 GMT -8
Joel, Yep,It is a bit of a bummer but it can mostly be repaired if I only look at it from one side!:>) Steve
|
|
|
Post by arcticwolf on Sept 28, 2020 9:27:12 GMT -8
Joel, Yep,It is a bit of a bummer but it can mostly be repaired if I only look at it from one side!:>) Steve Steve, we all have a few that should be permanently glued to the display shelf!
|
|
|
Post by pnance26 on Sept 30, 2020 10:05:46 GMT -8
Sorry for your bad luck!
I just built this kit earlier this summer. Kind of a fun build!
|
|
gorf
Full Time Ride
Posts: 133
|
Post by gorf on Sept 30, 2020 13:23:09 GMT -8
It was your build that forced me to pull one out of the closet and finish it!It will turn out fairly well I think.Just may sit s bit funny. Body part splt down the sides,cracked a few places but the two bulkheads did not budge so big problem was trying to re-align body halves.Not totally successful.Filler and paint touch up should be ok. I did enjoy your build.
|
|