|
Post by 2whl on Jan 20, 2022 18:55:31 GMT -8
|
|
|
Post by chrissmith on Jan 20, 2022 19:25:45 GMT -8
Oooh 😲, should be a great build!
|
|
|
Post by 2whl on Jan 23, 2022 14:49:35 GMT -8
Oooh 😲, should be a great build! Thanks Chris I got the engine block pieces cleaned up and drilled so I could assemble the basic block. Then I got the exhaust assembled. 49
|
|
|
Post by chrissmith on Jan 23, 2022 19:46:16 GMT -8
The DFV is shaping up 👍
|
|
|
Post by Joel_W on Jan 25, 2022 7:25:57 GMT -8
Chris, Just found your build thread, and I'll be following it till the Tyrell 006 crosses the finish line.
joel
|
|
|
Post by chrissmith on Jan 25, 2022 12:13:44 GMT -8
Chris, Just found your build thread, and I'll be following it till the Tyrell 006 crosses the finish line. joel Joel, sorry buddy this is Paul’s thread! I’m still working on the Ferrari 😉
|
|
|
Post by 2whl on Jan 27, 2022 15:26:32 GMT -8
Chris, Just found your build thread, and I'll be following it till the Tyrell 006 crosses the finish line. joel That's OK, Joel. You can still follow along. The two main differences that are visible in the two versions are the sidepod/engine cover and the extra fin off of the airbox. The extra fin is easy. It's an add-on which I can leave off. But the side pods had to go under the knife. So after double and triple checking my photo references, I crossed my fingers and did some surgery. A picture of Cevert at the Nurburgring 164
|
|
|
Post by chrissmith on Jan 27, 2022 20:05:21 GMT -8
Brave soul you are Dr. 😁
It takes big B⚽️🏀⚾️S To cut up a Hiro kit..
|
|
|
Post by 2whl on Jan 29, 2022 15:34:06 GMT -8
It takes big B⚽️🏀⚾️S To cut up a Hiro kit.. Either that or lack of common sense. I got the transmission and some of the rear suspension drilled and fitted. Main chassis pieces drilled and fitted. I still haven't decided if I will do Stewart's car or Cevert's. 212
|
|
|
Post by 2whl on Feb 1, 2022 13:02:22 GMT -8
|
|
|
Post by arcticwolf on Feb 1, 2022 13:52:01 GMT -8
Very cool!!
|
|
|
Post by chrissmith on Feb 1, 2022 19:06:44 GMT -8
Looking good buddy, glad to see your keeping this one in the front of the line. I sure hope the lure of a Williams doesn’t distract.
|
|
|
Post by Joel_W on Feb 3, 2022 8:25:13 GMT -8
Great progress for sure, especially with that side radiator side pod conversion. Came out perfect. The dry fit of the body really looks like the parts all fit perfectly.
joel
|
|
|
Post by 2whl on Feb 16, 2022 13:38:38 GMT -8
Great progress for sure, especially with that side radiator side pod conversion. Came out perfect. The dry fit of the body really looks like the parts all fit perfectly. joel Thanks Joel. I'd completely forgotten that I had this book. It'll come in handy for reference. I decided to take a stab at making the mirror mounts. MFH provides the .8 mm wire and templates. It was easier than I thought it would be, but I wish I had an extra set of hands to hold all of the parts together. 373
|
|
|
Post by pnance26 on Feb 18, 2022 6:24:54 GMT -8
Great work on those mirror mounts, Paul! Looks good all the way around!
|
|