Post by rasputen on Jan 22, 2013 14:16:46 GMT -8
Another re-post since the other road race forum seems to have disappeared. Here is a Heller Renault Alpine that I built pretty much stock. In typical Heller fashion, the seam between the body and chassis ran right through the front radiator opening and the lower driving lights. To get around this, I sawed the front part off of the chassis so that I could smooth out the visible seam. Now the joint between the body and chassis is underneath. I also added close-out panels to the front of the roll cage so that the driver would not be exposed to the front wheel wells.
I printed the A-L-P-I-N-E letters in silver foil on my ALPS printer. It's a lot easier than trying to paint them or use BMF.
I printed the A-L-P-I-N-E letters in silver foil on my ALPS printer. It's a lot easier than trying to paint them or use BMF.
Pro Tech | MAD | Scale Motorsport